Fuel sender
- Turn the ignition switch OFF, and then remove battery (-) cable.
- Remove the fuel pump assembly.
- Using an ohmmeter, measure the resistance between terminals 2 and 3 of sender connector (A) at each float level.FUEL SENDER PIN DESCRIPTION CHART
Pin No Description 1 - 2 Fuel sender signal 3 Fuel sender ground 4 Fuel pump motor (+) 5 Fuel pump motor ground - Also check that the resistance changes smoothly when the float is moved from "E" to "F".FUEL SENDER RESISTANCE SPECIFICATIONS
Position Resistance (Ω) E 197 ~ 203 Warning lamp 168 ~ 172 1/2 64.2 ~ 68.2 Sender (F) 6 ~ 10