Repair Procedures: Removal
- Remove the fuel pump.
(Refer to "FUEL PUMP ")
- Disconnect the electric pump wiring connector (A) and the fuel sender connector (B).
- Remove the fuel sender (A) after releasing the fix hook.
- Remove the fixing clip, and then disconnect the fuel feed tube quick-connector (B).
- Remove the head assembly (C) after releasing the fixing hooks.
- Remove the reservior-cup (A) after releasing the fixing hooks.
- Remove the cap (A), and then remove the assist pump (B).
- Disconnect the ground cable (A).
- Remove the fuel pressure regulator (B) after releasing the fixing hooks.
- Disconnect the ground cable connector (A) and the fuel pump tube cap (B).
- Separate the electric pump motor from the fuel filter after releasing the fixing hooks (A).