Repair Procedures: Removal

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Lift the vehicle.
Disconnect the canister close valve connector (A).
Disconnect the ventilation tube quick-connector (B) from the fuel tank air filter and canister close valve.

Fig 1: Disconnecting Canister Close Valve Connector
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the vapor tube quick-connector (A).
Remove the canister assembly bracket (D) after removing the mounting bolts (B) and nut (C).

Fig 2: Disconnecting Vapor Tube Quick-Connector
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the CCV Connector (A).

Fig 3: Disconnecting CCV Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the fuel tank air filter & canister close valve assembly (A) after rotating it in the direction of the arrow in the figure.

Fig 4: Removing Fuel Tank Air Filter & Canister Close Valve Assembly (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 5: Removing Fuel Tank Air Filter & Canister Close Valve Assembly (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA
Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter (C) after rotating it in the direction of the arrow in the figure.

Fig 6: Releasing Lever
Courtesy of HYUNDAI MOTOR AMERICA

Fig 7: Rotating Canister Close Valve From Fuel Tank Air Filter
Courtesy of HYUNDAI MOTOR AMERICA