LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Santa Fe Sport Base, FWD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column.
    Fig 1: Key Warning Switch Connector Terminals
    G12055037Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Ignition Switch Connector Terminals
    G12055038Courtesy of HYUNDAI MOTOR AMERICA
  2. Check for continuity between the terminals.
  3. If continuity is not specified, replace the switch.
Fig 3: Ignition Switch Terminals Continuity Chart
G12055039Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals