LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Santa Fe Sport Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Power Liftgate Module >> Power Liftgate Unit >> Repair Procedures >> Removal

Repair Procedures: Removal

CAUTION:
  1. After replacing with a new power liftgate module, check for DTC code at all times.

    If DTC code B24B0 exists, perform power liftgate mode change.

    (Refer to Power Liftgate Module - "Troubleshooting ")

  2. After replacing with a new power liftgate module, perform the system initialization.

    (Refer to Power Liftgate Module - "Troubleshooting ")

  3. Before delivery to customer, operate the power liftgate to be sure that there is no warning sound.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear left luggage side trim.

    (Refer to INTERIOR TRIM Body )

  3. Remove the power liftgate unit connectors after loosening mounting nuts (2 EA).
Fig 1: Power Liftgate Unit Connectors And Mounting Nuts
G12054776Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals