LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Santa Fe Sport Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Power Liftgate Module >> Power Liftgate Latch >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. After loosening the mounting screws, then remove the liftgate trim (A).
    Fig 1: Locating Liftgate Trim With Mounting Screws
    G12054777Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the liftgate latch assembly (A) after loosening the mounting bolts.
    Fig 2: Locating Liftgate Latch Assembly With Mounting Bolts
    G12054778Courtesy of HYUNDAI MOTOR AMERICA
  4. Loosen the PCU (Power Closing Unit) mounting nuts.
    Fig 3: Power Closing Unit Mounting Nuts
    G12054779Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the power liftgate latch connector (A) and PCU connector (B).
    Fig 4: Locating Power Liftgate Latch Connector And PCU Connector
    G12054780Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the power liftgate latch & PCU assembly (A).
Fig 5: Locating Power Liftgate Latch & PCU Assembly
G12054781Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals