LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Santa Fe Sport Base, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Smart Cruise Control System >> Smart Cruise Control Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver airbag module.

    (Refer to Restraint - "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")

  3. Remove the steering wheel.

    (Refer to MDPS COLUMN AND HOUSING Steering System )

  4. Remove the steering wheel cover (A) after loosening the screws.
    Fig 1: Removing Steering Wheel Cover Screws (1 Of 2)
    G12053779Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Removing Steering Wheel Cover Screws (2 Of 2)
    G12053780Courtesy of HYUNDAI MOTOR AMERICA
  5. Loosen the screws after disconnecting the steering wheel remote control switch connector (A).
    Fig 3: Disconnecting Steering Wheel Remote Control Switch Connector
    G12053781Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the remote control switches (A).
    Fig 4: Removing Remote Control Switches
    G12053782Courtesy of HYUNDAI MOTOR AMERICA