LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Santa Fe SE Ultimate, AWD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to "CRASH PAD LOWER PANEL ")

  3. Remove the steering column upper and lower shrouds.

    (Refer to "STEERING COLUMN SHROUD PANEL ")

  4. Remove the ignition switch (A) after disconnecting the 6P connector (B).
    G12036475Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the key warning and immobilizer connector (A).
    G12036476Courtesy of HYUNDAI MOTOR AMERICA
  6. If it is necessary to remove the key lock cylinder (A), remove the key lock cylinder with key ACC.
G12036477Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals