LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Ioniq Hybrid SEL >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Button Engine Start System (HEV)) >> Start / Stop Button >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Hyundai Ioniq. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash ped lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the start/stop button (B) after disconnect the connector (A).
    Fig 1: Removing Start/Stop Button
    G12113814Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals