Current data Analysis
WARNING: This page is about a different variant/trim than selected.
- IG key "ON"/Ready, Transmission Shift Lever "P" range.
- Select "Current Data" with GDS.
- Operate the vehicle over 10 minutes. (over 20 minutes in winter)
- Monitor "Generator (HSG) Temperature" parameter.
Reference Data
GENERATOR (HSG) TEMPERATURE REFERENCENormal □ Generator (HSG) Temperature: -20°C~200°C Abnormal □ Drive Motor Temperature: Rise higher than 185°C □ Drive Motor Temperature: 214°C or 215°C - Is the displayed current data normal?
YES
- Check for EWP* fault and amount of coolant.
→ Repair or replace as necessary, go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Check for Coolant Amount/Coolant Circulation of PE part.
- Check for Cooling Fan and EWP* working properly.
- Check for Generator (HSG*) cooling system.
- Go to "COMPONENT INSPECTION " procedure.
- Check for EWP* fault and amount of coolant.
NOTE:
EWP*: "ELECTRIC WATER PUMP (HEV)"
HSG*: "HYBRID STARTER & GENERATOR MOTOR"
HSG*: "HYBRID STARTER & GENERATOR MOTOR"