LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Elantra Value Edition >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Abs/Esp Diagnosis >> DTC C1702: Variant Coding Error >> DTC Inspection >> Variant Code Reset

Variant Code Reset

  1. Check for improper installation of EMS/TCU/ESC.
  2. Connect GDS to Data Link Connector (DLC).
  3. Ignition switch 'ON'.
  4. Perform variant code reset in "Vehicle S/W Management  " menu of the GDS.
  5. Disconnect GDS.
  6. Ignition switch 'OFF' and wait for about 10 seconds, and then ignition switch 'ON'. Go to "VARIANT CODING " procedure.
scientia non olet · About LEMON Manuals