LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Elantra Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Control System - 1.4L) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the ETC module connector (A).
  4. Remove the installation bolts, and then remove the ETC module (B) from the engine.
    Fig 1: Locating ETC Module And Connector
    G12020561Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the coolant hoses (A).
Fig 2: Locating Coolant Hoses
G12020562Courtesy of HYUNDAI MOTOR AMERICA