LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Elantra Limited >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Auto Lighting Control System >> Auto Light Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the auto light sensor (A) from crash pad upper side by using screw (-) driver.
    Fig 1: Locating Auto Light Sensor
    G12023752Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the auto light sensor connector.
scientia non olet · About LEMON Manuals