LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Elantra GT Standard Trans >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle System >> Back-Up Lamp Switch >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Disconnect the back up lamp switch connector (A).
    Fig 1: Disconnecting Back Up Lamp Switch Connector
    G12066535Courtesy of HYUNDAI MOTOR AMERICA
  2. Check the continuity between no. 1 and 2 terminals of backup lamp switch. When the shift lever is in reverse, there should be continuity.
Fig 2: Checking Continuity Between Backup Lamp Switch Terminals (1 And 2)
G12066536Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals