Engine Mounting Bracket

Install the jack to the edge of oil pan to support the engine.

Fig 1: Supporting Engine Using Jack
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: Insert the rubber block between jack and oil pan.
Disconnect the ground cable (A).
Tightening torque:

10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~ 10.1 lb-ft)
Remove the engine mounting support bracket (B).
Tightening torque

C: 28.8 ~ 73.5 N.m (6.0 ~ 7.5 kgf.m, 43.3 ~ 54.2 lb-ft)

D: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

Fig 2: Removing Engine Mounting Support Bracket
Courtesy of HYUNDAI MOTOR AMERICA
Remove the engine mounting bracket (A).
Tightening torque:

49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)

Fig 3: Removing Engine Mounting Bracket
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.