Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.

Stop the engine and uplift the vehicle with lift.
Remove the under cover (A).

Fig 1: Removing Under Cover
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the oil filler plug (A).

Fig 2: Loosening Oil Filler Plug
Courtesy of HYUNDAI MOTOR AMERICA
Check the oil level.
NOTE: Oil level must be up to fill the hole, if not, add oil until it runs over.

Fig 3: Checking Oil Level
Courtesy of HYUNDAI MOTOR AMERICA
Install the filler plug.
Tightening torque:

58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.8 lb-ft)