LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Elantra GT Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (1 Of 3) >> DTC P0191: Fuel Rail Pressure Sensor Circuit Range/Performance >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Rationality check
  1. Poor connection
  2. FPS
Case 1 Enable Conditions
  • Sensor Output Voltage is between 0.2V and 4.85V
Threshold Value
  • Sensor Output Voltage Jump time is lower than 0.06 sec
Diagnostic Time
  • 1 sec
Case 2 Enable Conditions
  • Deviation value of air fuel ratio control is lower than -6%
  • Fuel adaptive value of Multiplicative fuel adaption range is lower than 0.8
  • IG ON (Before engine start)
Threshold Value
  • Average value of fuel rail is lower than 0.1 MPa
Diagnostic Time
  • 6 sec
Case 3 Enable Conditions
  • Deviation value of air fuel ratio control is higher than 6%
  • Fuel adaptive value of Multiplicative fuel adaption range is higher than 1.2
  • Soaking Time is higher than 4hr
  • IG ON (Before engine start)
Threshold Value
  • Average value of fuel rail is higher than 1.5 MPa
Diagnostic Time
  • Immediate
Mil On Condition
  • 2 Drive Cycle