Repair Procedures: Removal

Remove the fuel pump.
(Refer to "FUEL PUMP ")
Disconnect the electric pump wiring connector (A) and the fuel sender connector (B).

Fig 1: Disconnecting Electric Pump Wiring Connector And Fuel Sender Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the head assembly (A) after releasing the cushion fixing clip (B).

Fig 2: Removing Head Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the fuel tube quick-connectors (C).

Fig 3: Disconnecting Fuel Tube Quick-Connectors
Courtesy of HYUNDAI MOTOR AMERICA
Remove the fuel sender (A) in the direction of an arrow.

Fig 4: Removing Fuel Sender
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the fuel tube connector (A).

Fig 5: Disconnecting Fuel Tube Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the cut valve (A) after releasing hooks (B).

Fig 6: Removing Cut Valve And Hooks
Courtesy of HYUNDAI MOTOR AMERICA
Remove the reservior-cup (B) after releasing the fixing hooks (A).

Fig 7: Removing Reservoir-Cup And Fixing Hooks
Courtesy of HYUNDAI MOTOR AMERICA
Release the fixing hooks, and then remove the pre-filter (A) and the fuel pressure regulator (B).

Fig 8: Removing Pre-Filter And Fuel Pressure Regulator

Courtesy of HYUNDAI MOTOR AMERICA