Removal and Installation

Disconnect the oil pressure switch connector (A) and then remove the oil pressure switch (B).
Tightening torque:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 1: Disconnecting Oil Pressure Switch Connector
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.
NOTE: When installing the oil pressure switch, apply seal lock to the thread.

Seal lock: THREEBOND 2403

Thickness: 0.2 ~ 0.4 mm (0.008 ~ 0.016 in.)

Fig 2: Checking Oil Pressure Switch Seal Lock To Thread Thickness

G12074274

Courtesy of HYUNDAI MOTOR AMERICA