Removal and Installation

Remove the engine cover.
Disconnect the battery negative terminal.
Remove the air duct (A).
Disconnect the breather hose (B).
Disconnect the intake hose (C) and air cleaner assembly (D).
Tightening torque

Hose clamp:

2.9 ~ 4.9 N.m (0.3 ~ 0.5 kgf.m, 2.2 ~ 3.6 lb-ft)

Air cleaner bolts:

3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

Fig 1: Disconnecting Intake Hose And Air Cleaner Assembly
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: Install the air intake hose while the center of the mark of hose must be in line with the throttle body rib.

Fig 2: Installing Air Intake Hose
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.