LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Elantra GT Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Delivery System >> Fuel Pump >> Repair Procedures >> Removal >> [Lev2]

Repair Procedures: Removal: [Lev2]

  1. Release the residual pressure in fuel line.

    (Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  2. Remove the rear seat.

    (Refer to "REAR SEAT ASSEMBLY ")

  3. Remove the fuel pump service cover (A).
    Fig 1: Removing Fuel Pump Service Cover
    G12066401Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B).
  5. Disconnect the fuel feed tube quick connector (C) and the vapor tube quick-connector (D).
  6. Remove the plate cover (E) after removing the mounting bolts.
    Fig 2: Disconnecting Fuel Pump Connector And Fuel Tank Pressure Sensor Connector
    G12066402Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the fuel pump from the fuel tank.
Fig 3: Removing Fuel Pump From Fuel Tank
G12066403Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals