LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Elantra GT Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Radiator >> Repair Procedures >> Inspection >> Radiator Cap Testing

Radiator Cap Testing

  1. Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester.
    Fig 1: Testing Radiator Cap
    G12074236Courtesy of HYUNDAI MOTOR AMERICA
  2. Apply a pressure of 93.16~122.58kPa (0.95~ 1.25kgf/cm2 , 13.51~17.78psi).
  3. Check for a drop in pressure.
  4. If the pressure drops, replace the cap.
scientia non olet · About LEMON Manuals