Repair Procedures: Replacement: [Removal]

CAUTION:

NOTE:

Remove the front pillar trim.
(Refer to "FRONT PILLAR TRIM ")
Remove the inside rear view mirror assembly.
(Refer to "INSIDE REAR VIEW MIRROR ")
Remove the rain sensor.
(Refer to "RAIN SENSOR ")
Remove the auto defog sensor.
(Refer to "AUTO DEFOG SENSOR ")
Remove the cowl top cover.
(Refer to "COWL TOP COVER ")
Using a screwdriver or remover, remove the windshield side molding (A).
[General Type]

Fig 1: Removing Windshield Side Molding (General Type)
Courtesy of HYUNDAI MOTOR AMERICA

[Panorama Sunroof Type]

Fig 2: Removing Windshield Side Molding (Panorama Sunroof Type)
Courtesy of HYUNDAI MOTOR AMERICA
Using masking tape create some alignment marks to aid in reinstallation.
Cut out the windshield sealant using the sealant cutting tool (09861-31100).

Fig 3: Cutting Out Windshield Sealant Using Sealant Cutting Tool (09861-31100)
Courtesy of HYUNDAI MOTOR AMERICA
Remove the windshield glass (B) carefully using the glass holder (A).

Fig 4: Removing Windshield Glass Using Glass Holder

Courtesy of HYUNDAI MOTOR AMERICA