Repair Procedures: Replacement

CAUTION:

NOTE:

Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.

Remove the front seat assembly.
(Refer to "FRONT SEAT ASSEMBLY ")
Remove the front seat shield outer cover.
(Refer to "FRONT SEAT SHIELD OUTER COVER ")
After loosening the mounting screws, then remove the front seat cushion track cover (A).

Fig 1: Removing Front Seat Cushion Track Cover
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting bolts, then remove the front seat cushion track (A).
Tightening torque:

44.1 ~ 53.9 N.m (4.5 ~ 5.5 kgf.m, 32.5 ~ 39.8 lb-ft)

Fig 2: Removing Front Seat Cushion Track
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.
Information
- Replace any damaged clips.
- Make sure the connector is plugged in properly.