Repair Procedures: Replacement

CAUTION:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.

NOTE:

Take care not to scratch the body surface.

Remove the rear console cover.
(Refer to "REAR CONSOLE COVER ")
After loosening the mounting screws, then remove the console armrest (A).

Fig 1: Removing Console Armrest Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.
Information
- Replace any damage clips.