LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Elantra GT Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Auto Lighting Control System >> Auto Light Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the auto light sensor (A) from crash pad upper side by using screw (-) driver.
    Fig 1: Locating Auto Light Sensor And Auto Light Connector
    G12076930Courtesy of HYUNDAI MOTOR AMERICA
    NOTE: Apply the protective tapes to auto light sensor and its related parts.
  3. Remove the auto light connector (B).
scientia non olet · About LEMON Manuals