LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Elantra GT Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control Switch >> Repair Procedures >> Inspection >> Measuring Resistance

Measuring Resistance

  1. Disconnect the cruise control switch connector from the control switch.
    Fig 1: Disconnecting Cruise Control Switch Connector From Control Switch
    G12066196Courtesy of HYUNDAI MOTOR AMERICA
  2. Measure resistance between terminals on the control switch when each function switch is ON (switch is pressed).
    Function switch Terminal Resistance
    CANCEL 3 - 4 180Ω ± 1%
    SET/- 3 - 4 330Ω ± 1%
    RES/+ 3 - 4 550Ω ± 1%
    ON/OFF 3 - 4 880Ω ± 1%
  3. If not within specification, replace switch.
scientia non olet · About LEMON Manuals