LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Azera Limited >> Repair and Diagnosis >> Engine Mechanical >> Intake And Exhaust System >> Front Muffler >> Repair Procedures >> Removal And Installation

Removal And Installation

  1. Disconnect the battery negative terminal.
  2. Remove the engine room under cover.
  3. Disconnect the heated oxygen sensor (HO2S) connector.

    (Refer to Fuel System - "HEATED OXYGEN SENSOR (HO2S) ")

  4. Remove the front muffler (A).

    Tightening torque: 

    39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

    Fig 1: Removing Front Muffler
    G12087070Courtesy of HYUNDAI MOTOR AMERICA
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals