LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Azera Limited >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Windshield Wiper/Washer System >> Front Wiper Motor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Loosen the windshield wiper arm nut (B) after removing a wiper cap (A).
    Fig 1: Removing Windshield Wiper Arm Nut
    G12093086Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove the windshield wiper arm and blade.
  3. If necessary, release the wiper blade fixing clip by pulling up and remove the wiper blade from the inside radius of wiper arm.
    Fig 2: Removing Windshield Wiper Arm And Blade
    G12093087Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the washer hose (A) connected to cowl top cover.
    Fig 3: Disconnecting Washer Hose To Cowl Top Cover
    G12093088Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the weather strip and the cowl top cover (A) after removing rivets.
    Fig 4: Removing Weather Strip And Cowl Top Cover
    G12093089Courtesy of HYUNDAI MOTOR AMERICA
  6. Disconnect the wiper motor connector (A) from the wiper motor & linkage assembly.
    Fig 5: Disconnecting Wiper Motor Connector From Wiper Motor & Linkage Assembly
    G12093090Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the windshield wiper motor and linkage assembly (A) after removing 2 bolts.
    Fig 6: Removing Windshield Wiper Motor And Linkage Assembly
    G12093091Courtesy of HYUNDAI MOTOR AMERICA
  8. Hold the wiper motor crank arm and remove the upper linkage (A).
    Fig 7: Removing Upper Linkage
    G12093092Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION: Before removing the wiper motor and linkage assembly, make sure that the linkage is stopped at auto stop position.
    To install the wiper motor crank arm exactly, check that the linkage is aligned with the crank arm in straight line and the angle of each linkages.
    Be careful not to bend the linkage.
  9. Remove the lower linkage (A) from the wiper motor crank arm.
    Fig 8: Removing Lower Linkage From Wiper Motor Crank Arm
    G12093093Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION: To install the wiper motor crank arm exactly, check that the linkage is aligned with the crank arm in straight line and the angle of each linkages.
    Be careful not to bend the linkage.
  10. Remove the crank arm (A) after loosening a nut.
    Fig 9: Removing Crank Arm Nut
    G12093094Courtesy of HYUNDAI MOTOR AMERICA
  11. Remove the wiper motor (A) after loosening the bolts.
Fig 10: Removing Wiper Motor Bolts
G12093095Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals