LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module And Sensors >> Front Impact Sensor (FIS) >> Repair Procedures >> Removal

Repair Procedures: Removal

CAUTION:
  • Removal of the airbag must be performed according to the precautions/procedures described previously.
  • Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
  • Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the air duct (A).
    Fig 1: Locating Air Duct With Bolts
    G12089559Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the radiator support upper member (A).
    Fig 2: Locating Radiator Support Upper Member With Bolts
    G12089560Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the front impact sensor connector (A).
    Fig 3: Locating Front Impact Sensor Connector And Mounting Nut
    G12089561Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the front impact sensor mounting nut (B).
  6. Remove the front impact sensor.
scientia non olet · About LEMON Manuals