Repair Procedures: Installation

Install the #1, #2 cylinder bore water jacket separator (A).

Fig 1: Installing Cylinder Bore Water Jacket Separator
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: Insert the separator align with block inner side protrusion, and it must be located under the cylinder head installing surface.

Fig 2: Inserting Separator With Block Inner Side Protrusion
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Installing Separator
Courtesy of HYUNDAI MOTOR AMERICA
Install the LH/RH cylinder head assembly and gasket. (Refer to Cylinder Head Assembly - "CYLINDER HEAD ")