Removal And Installation

Remove the battery and tray.
(Refer to Engine Electrical System - "BATTERY ")
Remove the air duct and air cleaner assembly.
(Refer to Intake And Exhaust System - "AIR CLEANER ")
Drain the coolant.
(Refer to Cooling System - "Coolant ")
Loosen the upper hose clip fixing bolt (A), and then remove the radiator upper hose (B) and lower hose (C).
Tightening torque:

3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

Fig 1: Removing Upper Hose Clip Fixing Bolt
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: When installing radiator hoses, install as shown in illustrations.

Fig 2: Installing Radiator Hoses
Courtesy of HYUNDAI MOTOR AMERICA
Installation is reverse order of removal