LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Rear Wheel Speed Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the rear wheel and tire.

    Tightening torque: 

    88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

  2. Remove the rear wheel speed sensor mounting bolt (A).

    Tightening torque: 

    6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 7.6 lb-ft)

    Fig 1: Locating Rear Wheel Speed Sensor Mounting Bolt
    G12091180
  3. Remove the rear seat back.

    (Refer to Body - "REAR SEAT ")

  4. Disconnect the rear wheel speed sensor connector.
  5. Installation is the reverse of removal.
    CAUTION: Install the rear sensor after lubricating the O-ring of sensor with the assembly fluid(RAREMAX AF-1).
    When inserting the sensor, take care the O-ring not to be damaged.
scientia non olet · About LEMON Manuals