LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Accent Value Edition >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (3 Of 3) >> DTC U1112: LIN Communication Error >> Component Inspection

Component Inspection

  1. IG "OFF".
  2. Connect probe to battery sensor to check signal waveform by using oscilloscope function.
  3. IG "ON" and monitor signal waveform.

    Specification:  Signal waveform will be displayed as Signal Waveform & Data

  4. Is the measured signal waveform O.K?

    YES 

    • Go to Verification Of Vehicle Repair procedure below.

    NO 

    • Substitute with a known - good battery sensor and check for proper operation. If the problem is corrected, replace battery sensor and go to Verification Of Vehicle Repair procedure below.
scientia non olet · About LEMON Manuals