Repair Procedures: Removal
- Release the residual pressure in fuel line (Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE " ).
- Remove the rear seat [LH] (Refer to REAR SEAT ).
- Remove the fuel pump service cover (A).
- Disconnect the fuel pump connector (A).
- Disconnect the fuel feed tube quick connector (B).
- Disconnect the fuel tank pressure sensor connector (C).
- Disconnect the vapor tube (D).
- Lift the vehicle and support the fuel tank with a jack.
- Remove the center muffler assembly (Refer to MUFFLER ).
- Disconnect the fuel filler hose (A) and the vapor hose (B).
- Remove the parking brake line installation bolt (A).
- Remove the fuel tank from the vehicle after removing the fuel tank band (A).