Removal And Installation

Disconnect the battery terminals (A). Disconnect the negative terminal first.
Tightening Torque

(-) terminal:

4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)

(+) terminal:

7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA
Remove the air duct and air cleaner assembly. (Refer to ENGINE AND TRANSAXLE ASSEMBLY )
Remove the battery insulation pad (A).
Remove the battery (B) after removing the mounting bracket.
Tightening torque:

9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the ECM connectors (A) and then remove the ECM (B) and the battery tray (C).
Tightening torque

ECM bracket bolts & nut:

9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)

Battery tray bolts:

9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse order of removal.
CAUTION: When installing the battery, fix the mounting bracket on the tray correctly.