LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Accent SE, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (3 Of 3) >> DTC P2195: O2 Sensor Signal Stuck Lean (Bank 1 Sensor 1) >> Component Inspection >> Check PCV

Check PCV

  1. IG "OFF" and remove PCV valve from rocker cover.
  2. Insert a thin stick into the PCV valve from the threaded side and verify that the plunger is moving.
  3. Is the PCV valve normally moving?

    YES 

    • Go to "Check injector for normal operation" as follows.

    NO