LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Veloster Turbo, Automatic DCT Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - 1.6L T-GDI >> Ignition Coil >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the Battery Negative Terminal.
  2. Remove the Engine Cover.
  3. Disconnect the Ignition Coil Connector (A).
    Fig 1: Locating Ignition Coil Connector
    G10604365Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • When removing the Ignition Coil Connector, pull the Lock Pin (A) and PUSH the Clip (B).
    Fig 2: Pulling Lock Pin With Clip
    G10604366Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the Ignition Coil (A).
Fig 3: Ignition Coil With Mounting Bolts
G10604367Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals