LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Veloster Turbo, Automatic DCT Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 1.6L T-GDI >> Fuel Pump >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Release the Residual Pressure In Fuel Line.

    (Refer to: Fuel Delivery System - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ").

  2. Remove the Rear Seat.

    (Refer to: Body - "Rear Seat Assembly").

  3. Remove the Fuel Pump Service Cover (A).
    Fig 1: Fuel Pump Service Cover
    G10604641Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the Fuel Pump Connector (A).
  5. Disconnect the Fuel Feed Tube Quick Connector (B) and the Vapor Tube Quick-Connector (D).
  6. Disconnect the Fuel Pressure Sensor Connector (C).
  7. Remove the Plate Cover (E) after removing the Bolts.
    Fig 2: Fuel Pump Connector, Fuel Feed Tube Quick Connector, Vapor Tube Quick-Connector, Fuel Pressure Sensor Connector And Plate Cover Bolts
    G10604642Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the Fuel Pump from the Fuel Tank.
Fig 3: Identifying Fuel Pump
G10604643Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals