LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Veloster Turbo, Automatic DCT Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Front Wheel Speed Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the Front Wheel and Tire.

    Tightening Torque: 

    88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

  2. Remove the Front Wheel Speed Sensor Mounting Bolt (A).

    Tightening Torque: 

    7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.9 ~ 8.7 lb-ft)

    Fig 1: Front Wheel Speed Sensor Mounting Bolt
    G10605178Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the Front Wheel Guard.
  4. Remove the Front Wheel Speed Sensor Cable Mounting Bolt.
  5. Disconnect the Front Wheel Speed Sensor Connector (A) and then remove the Front Wheel Speed Sensor.
    Fig 2: Front Wheel Speed Sensor Connector
    G10605179Courtesy of HYUNDAI MOTOR AMERICA
  6. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals