LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Veloster Turbo, Automatic DCT Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Smart Key System >> Smart Key Unit >> Repair Procedures >> Removal >> Interior #2 antenna

Interior #2 antenna

NOTE: Take care not to scratch the crash pad and related parts.
  1. Disconnect the Negative (-) Battery Terminal.
  2. Remove the Console.

    (Refer to: BD procedure - "CONSOLE ").

  3. Disconnect the Connector then remove the Interior #2 Antenna (A) after loosening 2 Screws.
    Fig 1: Loosening Interior 2 Antenna Screws
    G10605757Courtesy of HYUNDAI MOTOR AMERICA