LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Veloster Turbo R-Spec, Standard Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Manual Transaxle Control System - 1.6L T-GDI >> Shift Lever >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Install in the reverse order of removal.
    NOTE:
    • When installing, set Room Side Shift Lever and the T/M Side Lever to "3rd" position.
    • Install the Snap Pin of Select Cable after adjust the Select Cable when installing the Select Cable.

      (Refer to: Control Cable - "SELECT CABLE ADJUSTMENT ")

scientia non olet · About LEMON Manuals