LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Veloster Turbo R-Spec, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Control System - 1.6L GDI) >> Variable Intake Solenoid (VIS) Valve >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Disconnect the Variable Intake Solenoid Valve Connector (A).
  3. Disconnect the Vacuum Hoses (B) from the Valve.
  4. Remove the Installation Bolt, and then remove the Valve (C) from the Surge Tank.
    Fig 1: Solenoid Valve, Connector And Vacuum Hoses
    G10607988Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals