LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Veloster Turbo R-Spec, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Control System - 1.6L GDI) >> Manifold Absolute Pressure Sensor (MAPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Disconnect the Manifold Absolute Pressure Sensor Connector (A).
  3. Remove the Installation Bolt (B), and then remove the Sensor from the Surge Tank.
    Fig 1: Manifold Absolute Pressure Sensor Connector And Installation Bolt
    G10607919Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals