LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Veloster Turbo R-Spec, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Control System - 1.6L GDI) >> Fuel Pressure Control Valve >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Disconnect the fuel pressure regulator valve connector.
  3. Measure resistance between the Fuel Pressure Regulator Valve Terminals 1 and 2.
  4. Check that the resistance is within the Specification.

    Specification  : Refer to: "SPECIFICATION ".

scientia non olet · About LEMON Manuals