Repair Procedures: Inspection

Remove the Fuse Box Cover.
Remove the Starter Relay (A).

Fig 1: Starter Relay Location
Courtesy of HYUNDAI MOTOR AMERICA

Using an Ohmmeter, check that there is continuity between each Terminal.

Terminal	Continuity
30 - 87	NO
85 - 86	YES

Apply 12V to Terminal 85 and Ground to Terminal 86.
Check for continuity between Terminals 30 and 87.

Fig 2: Checking Continuity Between Starter Relay Terminals
Courtesy of HYUNDAI MOTOR AMERICA
If there is no continuity, replace the Starter Relay.
Install the Starter Relay.
Install the Fuse Box Cover.