LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Starting System - 1.6L T-GDI) >> Starter >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the Battery Negative Terminal.
  2. Remove the Air Duct and Air Cleaner Assembly.

    (Refer to: Engine Mechanical System - "AIR CLEANER ").

  3. Disconnect the Starter Cable (B) from the B-Terminal on the Solenoid then disconnect the Connector from the S-Terminal (A).
    Fig 1: Starter Cable And S-Terminal
    G10604412Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the 2 Bolts holding the Starter, then remove the Starter (A).
Fig 2: Starter With Mounting Bolts
G10604413Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals