LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Tucson SE, 4WD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System - 2.0L >> Line Pressure Control Solenoid Valve >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Turn ignition switch OFF.
  2. Remove the air duct. (Refer to Engine Mechanical System - "AIR CLEAN 2.0L ")
  3. Disconnect the solenoid valve connector(A).
    Fig 1: Disconnecting Solenoid Valve Connector
    G11643919Courtesy of HYUNDAI MOTOR AMERICA
  4. Measure refusal between sensor signal terminal and sensor ground terminal.
  5. Check that the refusal is within the specification.
scientia non olet · About LEMON Manuals