LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Tucson SE, 4WD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Transfer Fluid >> Repair Procedures >> Inspection

Repair Procedures: Inspection

Information 

  1. Remove the under cover. (Proceed to Engine Mechanical System - "ENGINE ROOM UNDER COVER ").
  2. Remove the oil filler plug (A).

    [Gasoline 2.0 GDI] 

    Fig 1: Locating Oil Filler Plug (Gasoline 2.0 GDI)
    G11644036Courtesy of HYUNDAI MOTOR AMERICA

    [Gasoline 1.6 T-GDI] 

    Fig 2: Locating Oil Filler Plug (Gasoline 1.6 T-GDI)
    G11644037Courtesy of HYUNDAI MOTOR AMERICA
  3. Check the oil level.

    Information 

    Oil level must be up to fill the hole, if not, add oil until it runs over.

    Fig 3: Checking Oil Level
    G11644038Courtesy of HYUNDAI MOTOR AMERICA
  4. Install the oil filler plug with new gasket.

    Tightening Torque: 

    39.2 ~ 58.8N.m (4.0 ~ 6.0kgf.m, 28.9 ~ 43.4lb-ft)

  5. Install the under cover. (Proceed to Engine Mechanical System - "ENGINE ROOM UNDER COVER ").