Repair Procedures: Removal

[Gasoline 2.0 GDI] 

1. Remove the following parts;
   • Sub frame assembly (Proceed to Suspension System - "SUB FRAME ")
   • Drive shaft assembly. (Proceed to Driveshaft and axle - "FRONT DRIVESHAFT ")
2. Remove the propeller shaft (A).

   Tightening Torque: 

   49.0 ~ 68.6N.m (5.0 ~ 7.0kgf.m, 36.2 ~ 50.6lb-ft)

   Fig 1: Removing Propeller Shaft (Gasoline 2.0 GDI)

   Courtesy of HYUNDAI MOTOR AMERICA
3. Loosen the transfer upper & lower mounting bolts. (transfer side → transaxle side)
   Fig 2: Transfer Upper & Lower Mounting Bolts Location (1 Of 2)

   Courtesy of HYUNDAI MOTOR AMERICA
   Fig 3: Transfer Upper & Lower Mounting Bolts Location (2 Of 2)

   Courtesy of HYUNDAI MOTOR AMERICA
4. Loosen the transfer lower mounting blot. (Transaxle Side → Transfer Side)
   Fig 4: Locating Transfer Lower Mounting Blot

   Courtesy of HYUNDAI MOTOR AMERICA
5. Remove the transfer assembly.

[Gasoline 1.6 T-GDI] 

1. Remove the propeller shaft (A).

   Tightening Torque: 

   49.0 ~ 68.6N.m (5.0 ~ 7.0kgf.m, 36.2 ~ 50.6lb-ft)

   Fig 5: Removing Transfer Assembly Propeller Shaft (Gasoline 1.6 T-GDI)

   Courtesy of HYUNDAI MOTOR AMERICA
2. Loosen the transfer assembly mounting bolts (A).
3. Remove the transfer assembly (B).
   Fig 6: Locating Transfer Assembly Mounting Bolts (1 Of 2)

   Courtesy of HYUNDAI MOTOR AMERICA
4. Fig 7: Locating Transfer Assembly Mounting Bolts (2 Of 2)

   Courtesy of HYUNDAI MOTOR AMERICA